CNM-3 catalyst for production of dimethyl ether through methanol dehydration
CNM-3 catalyst made from thermally-treated hydrated alumina, as well as other active components and additives is a catalyst for dehydration and synthesis of dimethyl ether from methanol by the gas phase method.
  • Brief information >
  • Properties >
  • Other >

BRIEF INTRODUCTION

CNM-3 catalyst made from thermally-treated hydrated alumina, as well as other active components and additives is a catalyst for dehydration and synthesis of dimethyl ether from methanol by the gas phase method.

The catalyst was developed for production of dimethyl ether through methanol dehydration and won “the title of national key new product” in 2010 (project number: 2010GRF00005).

PERFORMANCE FEATURES

In the catalytic reaction for dehydration synthesis of dimethyl ether by the gas phase method, the catalyst features high catalytic activity, high selectivity, long service life, simple operations and strong resistance against toxics. It can maintain a stable catalytic performance during long-term use.

TECHNICAL INDICATORS

Catalyst model

CNM-3

Overall dimensions (Ф×H) mm

Φ3×(410)

Specific surface area m2/g

202±20

Pore volume ml/g

0.50±0.03

Average pore size mm

9.8±2.0

Bulk density g/cm3

0.70

Radial crushing strength N/cm

≥60

PACKAGING

After getting packed into two layers of plastic bags, the product can be put into a plastic drum (30kg/drum), and sealed with a rubber gasket.

STORAGE & TRANSPORT

The packed product should be stored in a dry warehouse and kept from toxics, dampness and frost. During its delivery, rolling, collisions and drops are forbidden.

Media Inquiry
Tel:028-85965839
Contact Us | Site Map | Legal | Links | FAQs
China Haohua Chemical (Group) Corporation all rights reserved. Without written authorization from
China Haohua Chemical (Group) Corporation such content shall not be republished or used in any form.
Produced By CMS 网站群内容管理系统 publishdate:2019/09/09 08:23:42