CN-30 gaseous hydrocarbon pre-reforming catalyst
CN-30 catalyst is applicable to pre-reforming units for producing ammonia syngas, methanol syngas, city gas and hydrogen from natural gas, oil field gas, refinery tail gas and other gaseous hydrocarbons.
  • Brief information >
  • Properties >
  • Other >

BRIEF INTRODUCTION

CN-30 catalyst is applicable to pre-reforming units for producing ammonia syngas, methanol syngas, city gas and hydrogen from natural gas, oil field gas, refinery tail gas and other gaseous hydrocarbons.

PERFORMANCE FEATURES

Excellent activity and stability at low temperatures: As a special preparation technology is adopted, active components are evenly distributed on carrier surfaces, endowing the catalyst with a low-temperature activity. Composition of the reforming gas is close to the reaction equilibrium composition under outlet process conditions of the pre-reformer.

Resistance against water vapor oxidation: During operations, if the catalyst is oxidized due to separate input of water vapor, the catalyst can be reduced to resume its original activity.

Excellent reducing property at low temperatures: At low temperatures, it can be reduced, so no additional devices are needed during the startup.

Resistance against carbon deposition: When the feed gas contains a large amount of higher hydrocarbons, higher hydrocarbons and its cracking products could be converted into CH4, H2 and CO2. The catalyst will not be damaged due to hydrocarbon cracking and carbon deposition, so it is applicable to the feed gas containing a large amount of higher hydrocarbons.

TECHNICAL INDICATORS

Catalyst model

CN-30

Appearance

Raschig ring

4-hole cylinder

Dimension (outer dia × H × inner dia (pore size)) mm

Φ12×6×4

Φ12×6×34

Bulk density kg/L

1.11.2

1.01.1

Radial crushing strength N/particle

≥250

≥200

Content of active component (NiO) wt %

≥25

≥25

Carrier

Calcium aluminate

Calcium aluminate

Note: Catalysts in other dimensions or appearances are according to customer’s requirements.

PACKAGING

Plastic bags are used as inner packages. Iron drums or rigid plastic drums are used as outer packages.

STORAGE & TRANSPORT

During storage, the catalyst should be kept from damp, frost and contamination. It should be handled with care.

Media Inquiry
Tel:028-85965839
Contact Us | Site Map | Legal | Links | FAQs
China Haohua Chemical (Group) Corporation all rights reserved. Without written authorization from
China Haohua Chemical (Group) Corporation such content shall not be republished or used in any form.
Produced By CMS 网站群内容管理系统 publishdate:2019/09/09 08:23:49