CN-36-2 gaseous hydrocarbon 2-stage thermal protection catalyst
CN-36-2 thermal protection catalyst is a heat-resistant thermal protecting agent prepared by a high-temperature sintering method, with a little amount of nickel as the active component and aluminum oxide as the carrier. It is used with CN-36-1 as a thermal protecting agent at the top of 2-stage reformers of large and medium ammonia plants. Its use is adaptable to a specific operating environment and conditions at the top of 2-stage reformers and resistant against high temperatures and airflow washout.
  • Brief information >
  • Properties >
  • Other >

BRIEF INTRODUCTION

 
CN-36-2 thermal protection catalyst is a heat-resistant thermal protecting agent prepared by a high-temperature sintering method, with a little amount of nickel as the active component and aluminum oxide as the carrier. It is used with CN-36-1 as a thermal protecting agent at the top of 2-stage reformers of large and medium ammonia plants. Its use is adaptable to a specific operating environment and conditions at the top of 2-stage reformers and resistant against high temperatures and airflow washout.
 

PERFORMANCE FEATURES

 
Thermal protection: It can be used at 1350℃ for a long time. The structure is stable during use at high temperatures. It can endure a violent impact. At 1450℃, it will not melt into blocks. It has good resistance against quick heating and cooling. Stable structure and mechanical strength: The catalyst has an optimal cellular structure, which is stable to ensure a sufficient service life.
 

TECHNICAL INDICATORS

 

Catalyst model

CN-36-2

Appearance

Raschig ring

Dimensions (Outer dia. × H × inner dia.)mm

Φ25×1618×10

Bulk density (kg/L)

1.0

Radial crushing strength (N/particle)

≥400

Active component

NiO≥5

 
Note: Catalysts in other dimensions or appearances are according to customer’s requirements.
 

PACKAGING

 
Plastic bags are used as inner packages. Iron drums or rigid plastic drums are used as outer packages.
 

STORAGE & TRANSPORT

 
During storage, the catalyst should be kept from damp, frost and contamination. It should be handled with care.
Media Inquiry
Tel:028-85965839
Contact Us | Site Map | Legal | Links | FAQs
China Haohua Chemical (Group) Corporation all rights reserved. Without written authorization from
China Haohua Chemical (Group) Corporation such content shall not be republished or used in any form.
Produced By CMS 网站群内容管理系统 publishdate:2019/09/09 08:23:53