CO and H2 through the catalytic cracking of methanol
CO is mainly used in carbonyl synthesis, while H2 is mainly used in oil refining, and the metallurgical, electronics, and fine chemicals industries.
  • Brief information >
  • Properties >
  • Other >

Brief introduction

CO is mainly used in carbonyl synthesis, while H2 is mainly used in oil refining, and the metallurgical, electronics, and fine chemicals industries.

Technical features and capacity

The catalytic cracking of methanol generates mixed gas containing ~68 percent (v/v) hydrogen and ~30 percent (v/v) CO, then, through PSA purification, we obtain hydrogen with a purity of 99.99 percent (v/v) and CO with a purity of 99.5 percent (v/v). This operation is quite simple, energy conserving, and pollution free.

Capacity: 2~3000Nm3/h

Technical indicators (at 1000 Nm3 of mixed gas)

Item

Specification

Unit

Consumption quota

Methanol

99.5%

t

0.490.50

Electricity

220V/380V

kWh

4550

Fuel oil

kg

144145

Cooling water

t

3040

Instrument air

Nm3

120130

Special-purpose catalyst

1.The service life exceeds two years.

2.It is highly active with little catalyst consumption.

3.Selectivity is high, and the content of CH4 in cracking gas is below 0.8 percent.

We research, produce, and provide high-quality catalyst exclusively for methanol cracking on a long-term basis.

Media Inquiry
Tel:028-85965839
Contact Us | Site Map | Legal | Links | FAQs
China Haohua Chemical (Group) Corporation all rights reserved. Without written authorization from
China Haohua Chemical (Group) Corporation such content shall not be republished or used in any form.
Produced By CMS 网站群内容管理系统 publishdate:2019/09/09 08:23:39