XN2008-XC cyclic sampler
N2008-XC cyclic sampler is used to send samples taken from six sampling points into the same injection port at different times. Through setting keys on the panel, the number of sampling points, sequences and other parameters can be set. Application of the cyclic sampler can raise the automation level of analysis and testing posts, reduce the quantity of analytical instruments, raise use efficiency of analytical instruments, lower labor intensity of the corresponding posts and raise data management levels and work efficiency.
  • Brief information >
  • Properties >
  • Other >

BRIEF INTRODUCTION

N2008-XC cyclic sampler is used to send samples taken from six sampling points into the same injection port at different times. Through setting keys on the panel, the number of sampling points, sequences and other parameters can be set. Application of the cyclic sampler can raise the automation level of analysis and testing posts, reduce the quantity of analytical instruments, raise use efficiency of analytical instruments, lower labor intensity of the corresponding posts and raise data management levels and work efficiency.

It is applicable to the flow and chemical productions that are needed for automatic online monitoring and multi-point samplings.

TECHNICAL INDICATORS

1. Driving power supply: 220VAC/100W

2. No. of sampling points: optional, 1~ 6

3. Control signal: ≥2ms 6V pulse signal

4. Switching time: ≤3s/point

Media Inquiry
Tel:028-85965839
Contact Us | Site Map | Legal | Links | FAQs
China Haohua Chemical (Group) Corporation all rights reserved. Without written authorization from
China Haohua Chemical (Group) Corporation such content shall not be republished or used in any form.
Produced By CMS 网站群内容管理系统 publishdate:2019/09/09 08:24:03